LinearFlow InGround Flex White

LINEARFLOW INGROUND FLEX WHITE is an innovative in-ground lighting solution that has a range of monochrome LEDs available and is designed for high-traffic environments and areas exposed to water. The flex version can be bend bent horizontally or vertically.

By seamlessly integrating a LED strip, continuous reinforced silicone diffuser cover and metal raceway profiles into a single system, it delivers exceptional durability, waterproof performance, and impact resistance.

Available in three channel options suitable for walk over to 30T driver over installations, LINEARFLOW INGROUND can be specified with confidence for everything from pedestrian walkways and plazas to roads, driveways, and other heavy-duty applications.

Description

Features

Product Type: Flexible Walk and Drive Over Linear Light with White LEDs
IP Rating: IP68, suitable to be fully submersible
Bending Orientations: Vertical or Horizontal
General Product Code: 7131111x
Light Source: Epistar SMD 2835 LEDs
Colour Options (CCT): 2100K, 3000K or 5000K
Colour Rendering: 80+ CRI
LED Lifetime (LM-80): 50,000 Hours (70% Lumen Maintenance)
Luminous Output / Efficacy: Up to 400 lm/m : Up to 38 lm/W

Warranty: 5 years
Resistant to: Solvents, UV, Heat and Saltwater
Jacket Material: Silicone
LED Power Available: 10.8W (Vertical Bend), 12W (Horizontal Bend)
Mounting Profile lengths: 204mm, 504mm, 1004mm
Supply Voltage: 24Vdc Constant Voltage
Power Supply: Remote Constant Voltage Power Supply with Dimmer options
Mounting: Flexible Stainless Steel Channels

LinearFlow Flex InGround

Downloads

Full Specification Sheet

Driver Sheet

LinearFlow Inground Flex White product codes

71311*1* – [LED Colour Code] – W – [Length Code] – [Wire Code]

71311215-8030-W-0500-C0B0

LINEARFLOW INGROUND FLEX WHITE IP68, White Silicone Outer Casing, Horizontal Bend, 12W/m LEDs, CRI 80+ Warm White 3000K at 500mm Cut Length, Single Ended Wiring with Injection Moulded End Caps.

END1 = IP68 Injection Moulded End Feed Cap with 0.3m Cable
END2 = IP68 Injection Moulded Dead End Cap with NO Cable

Total Length (+ End Caps) = 500mm, Light Emitting Surface Length = 500mm (9 x 55.6mm LED Modules),
Strip wattage = 6W (9 x 0.66 Module Power), Strip output = Up to 225lm.

Principle variants, see Specification Sheets for full details.

ARTICLE NUMBER	DESCRIPTION
71311114	LinearFlow Inground White LED, Silicone casing, vertical bend, 10.5W/m
71311214	LinearFlow Inground White LED, Silicone casing, horizontal bend, 10.5W/m
71311115	LinearFlow Inground White LED, Silicone casing, vertical bend, 12W/m
71311215	LinearFlow Inground White LED, Silicone casing, horizontal bend, 12W/m

Product parameter codes

Length Code	[0056] to [10000] .
LED Colour Code	80+ CRI: 2150K [8021], 3050K [8030], 5000K [8050]
Wire Code	see spec. sheet for details

Accessories codes

(See Product Specification Sheet for additional details)

Stainless steel housing channel	71319210-XXXX Lengths Available 500/1000 Custom lengths available on special request
Stainless steel housing silicone diffuser /m (Max 10m)	71319500-XXXX
Stainless steel housing protective pvc cover /m (Max 30m)(for installation only)	71319510-XXXX
Stainless Steel Plain End Cap	71319220
Stainless Steel Cable End Cap	71319221
Silicone Cover Locking bracket	71319222
Rubber Grommet	71319260
Stainless Steel Fixing Bracket	71319241
Support Stand Kit	71309240
Aluminium Straight Joining Bracket	71309320
Field Installable female connector + 500mm Cable	71309170-0500
Side Cable Feed Profile	71319223

Driver codes

(Example list, see Driver Sheet for full detail including fitting loading)

273-858-040	LED Constant Voltage Power Supply 24Vdc 40W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-080	LED Constant Voltage Power Supply 24Vdc 80W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-100	LED Constant Voltage Power Supply 24Vdc 100W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-150	LED Constant Voltage Power Supply 24Vdc 150W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-240	LED Constant Voltage Power Supply 24Vdc 240W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-848	LED Single Channel Dimmer 6A 6-24Vdc, DMX / 0-10V / 1-10V, with DMX in & out, 10V In & out.
205-057	Rotary Potentiometer for 1-10V Controllers
205-029	OTDALI DIM LED PWM DALI Dimmer interface 5A 12/24Vdc 50/120W
273-606-1	LED Constant Voltage DALI Dimmer Single Channel 12/24V 8A twin output
273-606-2	LED Constant Voltage DMX Dimmer Single Channel 12/24V 8A twin output
273-606-3	LED Constant Voltage Analogue (0-10V) Dimmer Single Channel 12/24V 8A twin output
273-607-1	LED Constant Voltage DALI Dimmer Two Channel 12/24V 8A two output
273-607-2	LED Constant Voltage DMX Dimmer Two Channel 12/24V 8A two output
273-550	LED Constant Voltage DALI & DMX Dimmer Four Channel 12/24V 24A four output (6A per output)
205-074	LED Constant Voltage DMX Dimmer Four Channel 12/24V 16A four output (4A per output)
273-604-1	LED Constant Voltage Integrated 100W PSU & DALI/DMX Dimmer Four Channel 12/24V 8A

To find out more get in touch

LEDBar Installation

Name of Project: Natural History Museum

Location: SW1, London

Lighting Designer: DHA Designs

LEDBar Installation

Page Park Architects. Scottish Borders Council/Live Borders. Ogilvie Construction. Turner & Townsend. Goodsons Associates. Atelier 10.

Name of Project: The Great Tapestry

Location: Scotland