LinearFlow InGround Flex RGBW

LinearFlow InGround Flex RGBW

LINEARFLOW INGROUND FLEX RGBW is an innovative rigid in-ground lighting solution with quad-chip LEDs designed for high-traffic environments and areas exposed to water. The flex version can be bend bent horizontally, vertically or sometimes both.

By seamlessly integrating a LED strip, continuous reinforced silicone diffuser cover and metal raceway profiles into a single system, it delivers exceptional durability, waterproof performance,
and impact resistance.

Available in three channel options suitable for walk over to 30T driver over installations, LINEARFLOW INGROUND can be specified with confidence for everything from pedestrian walkways and plazas to roads, driveways, and other heavy-duty applications.

Categories: , , , , , , , , , ,

Description

Features

  • Product Type: Flex Walk and Drive Over Linear Light with RGBW LEDs
  • IP Rating: IP68, suitable to be fully submersible
  • Bending Orientations: Horizontal or Vertical
  • General Product Code: 71311x5x
  • Light Source:Epistar SMD 5050 LEDs
  • Colour Options (CCT): RGB + 2700K
  • Colour Rendering: 80+ CRI
  • LED Lifetime (LM-80): 50,000 Hours (70% Lumen Maintenance)
  • Luminous Output / Efficacy: Up to 330 lm/m : Up to 24lm/W
  • Warranty: 5 years
  • Resistant to: Solvents, UV, Heat and Saltwater
  • Jacket Material: Silicone
  • LED Power Available: 15W, 13.5W
  • Mounting Profile lengths: 500mm, 1000mm (Custom lengths available on special request)
  • Supply Voltage: 24Vdc Constant Voltage
  • Power Supply: Remote Constant Voltage Power Supply with Dimmer options
  • Mounting: Rigid Aluminium and Stainless Steel Channels

LinearFlow InGround

Downloads

Full Specification Sheet

Driver Sheet

LinearFlow Inground Flex RGBW product codes

71311*5* – [LED Colour Code] – W – [Length Code] – [Wire Code]

71311255-RGB27-W-0500-C0B0

LINEARFLOW INGROUND FLEX RGBW IP68, White Silicone Outer Casing, Horizontal Bend, 15W/m LEDs, RGB + 2700K at 500mm Cut Length, Single Ended Wiring with Injection Moulded End Caps.

END1 = IP68 Injection Moulded End Feed Cap with 0.3m Cable
END2 = IP68 Injection Moulded Dead End Cap with NO Cable

Total Length (+ End Caps) = 500mm, Light Emitting Surface Length = 500mm (6 x 83.3mm LED Modules),
Strip wattage = 7.5W (6 x 1.25 Module Power), Strip output = Up to 165lm.

Principle variants, see Specification Sheets for full details.

ARTICLE NUMBERDESCRIPTION
71301155LinearFlow Inground RGBW LED, Silicone casing, Vertical Bend,13.5W/m
71301256LinearFlow Inground RGBW LED, Silicone casing, Horizontal Bend,15W/m

Product parameter codes

Length Code[0084] to [10000] .
LED Colour CodeRGB + 2700K [RGB27]
Wire Codesee spec. sheet for details

Accessories codes

(See Product Specification Sheet for additional details)

Stainless steel housing channel71319210-XXXX Lengths Available 500/1000
Custom lengths available on special request
Stainless steel housing silicone diffuser /m (Max 10m)71319500-XXXX
Stainless steel housing protective pvc cover /m
(Max 30m)(for installation only)		71319510-XXXX
Stainless Steel Plain End Cap71319220
Stainless Steel Cable End Cap71319221
Silicone Cover Locking bracket71319222
Rubber Grommet71319260
Stainless Steel Fixing Bracket71319241
Support Stand Kit71309240
Aluminium Straight Joining Bracket71309320
Field Installable female
connector + 500mm Cable		71309170-0500
Side Cable Feed Profile71319223

Driver codes

(Example list, see Driver Sheet for full detail including fitting loading)

273-858-040LED Constant Voltage Power Supply 24Vdc 40W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-080LED Constant Voltage Power Supply 24Vdc 80W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-100LED Constant Voltage Power Supply 24Vdc 100W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-150LED Constant Voltage Power Supply 24Vdc 150W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-858-240LED Constant Voltage Power Supply 24Vdc 240W 100-305Vac 47-63 Hz. WIth 300mm input & output leads
273-848LED Single Channel Dimmer 6A 6-24Vdc, DMX / 0-10V / 1-10V, with DMX in & out, 10V In & out.
205-057Rotary Potentiometer for 1-10V Controllers
205-029OTDALI DIM LED PWM DALI Dimmer interface 5A 12/24Vdc 50/120W
273-606-1LED Constant Voltage DALI Dimmer Single Channel 12/24V 8A twin output
273-606-2LED Constant Voltage DMX Dimmer Single Channel 12/24V 8A twin output
273-606-3LED Constant Voltage Analogue (0-10V) Dimmer Single Channel 12/24V 8A twin output
273-607-1LED Constant Voltage DALI Dimmer Two Channel 12/24V 8A two output
273-607-2LED Constant Voltage DMX Dimmer Two Channel 12/24V 8A two output
273-550LED Constant Voltage DALI & DMX Dimmer Four Channel 12/24V 24A four output (6A per output)
205-074LED Constant Voltage DMX Dimmer Four Channel 12/24V 16A four output (4A per output)
273-604-1LED Constant Voltage Integrated 100W PSU & DALI/DMX Dimmer Four Channel 12/24V 8A
To find out more get in touch

LEDBar Installation

Name of Project: Natural History Museum

Location: SW1, London

Lighting Designer: DHA Designs

LEDBar Installation

Name of Project: The Great Tapestry

Location: Scotland

Related products

© Copyright - |   Light Projects    |   All Rights Reserved.